Skip to main content

Full text of "Wearables"

See other formats

Stacked Beaded Bracelets 


Make Projects 

build, hack, tweak, share, discover. 

Stacked Beaded Bracelets 

Written By: Alicia 


Inspired by the summer trend, "stacked" beaded bracelets are seen in magazines like 
Seventeen and Instyle and worn by celebs like Miley Cyrus and Vanessa Hudgens. This 
easy and quick D.I.Y. will have you rockin' your beaded bracelets all season long. 

Step 1 — Stacked Beaded Bracelets 

• Materials: 

• Tape 

• G-S Hypo Cement or Craft Glue 

• Various styles of small to 
medium beads (the number 
depends on wrist size) 

• Charm and jump ring for center 
of bracelet 

• Elastic cord 

• Tools: Measuring tape; scissors; 
adhesive tape; chain nose and 
round nose pliers. 

© Make Projects 

Page 1 of 3 

Stacked Beaded Bracelets 

Step 2 

• Measure your wrist (I measured 
mine at 6V2"). The number of beads 
you will need depends on your 
wrist size. 

• Typical measurements are: 
small 6-7 1 /2; medium 71/2-8; 
large 8V2-9. 

• Add 5 inches and cut elastic cord 
to length. Add a jump ring to the 
charm using chain nose & round 
nose pliers and thread the charm 
on the cord. 

• Place the charm in the center of 
the cord. Add your beads on one 
side of the charm until you reach 1 
inch from end. Tape cord to keep 
beads from coming off. 

Step 3 

• Add beads on the other side of the 
charm until you reach 1 inch from 
the end. 

• Grab the cord ends and tie two 
overhand knots. 

• Put a drop of craft glue or G-S 
Hypo Cement on the knot. Let dry 
overnight then cut ends with 

© Make Projects 

Page 2 of 3 

Stacked Beaded Bracelets 

Step 4 

• Now wear your new bracelets and 
rock your fashion world! 

This document was last generated on 2012-11-03 01 :32:33 AM. 

© Make Projects 

Page 3 of 3